10 Myths Your Boss Is Spreading Concerning Repairs To Upvc Windows
10 Myths Your Boss Is Spreading Concerning Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as aluminum and timber.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and increase energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good shape.
For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case you'll need to source some plastic spacers that assist the new pane to fit properly into the frame of the window.
Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor and could be trampled under.
Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional is able to come out and fix the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, as it will provide the best of both worlds.
2. Sagging
Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. Over time, they can develop a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from getting worse.
Repositioning the hinges could aid in fixing a window that is sagging. To do this, you'll need open the window to get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in place.
If you can't reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is essential to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.
uPVC handles may also loosen up. The majority of the time this is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to shut the window and perform a test fitting. The joint at the corners of the sash should align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.
3. Water Leaks
It is crucial to act if you get up each morning to find a smoky wall and wet floors. Windows that leak water do can not only read more cause destruction of your home's structure but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
It is a fairly easy fix that can be done by any skilled DIYer. Based on the severity of the problem the caulking that was used up may need to be removed before a new layer can be applied. It is important to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and could reduce your energy efficiency.
Verify that the drainage holes are free of debris in them, and also ensure here that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.
Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the house.
If the leakage is occurring between the double-glazed window, it is more likely the problem is related to the seal, not the frame. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or slack and blow open in a breeze it could be hinges at fault. Anyone with the skills to fix them can replace these in a matter of minutes.
Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they can wear down over time. The process of replacing a hinge on a window is an easy process, but it's simpler with someone else to assist in holding the frame in place.
Make sure that the uPVC hinges open and close in the proper direction. You can do this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.
Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be more than happy to give you suggestions.
Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using the lubricant u p v c windows near me that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. window doctor near me It can also lower the chance of windows sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by several different causes. The hinges can also become disaligned as a result of wear, which can cause gaps between the frame and sash. If they're beyond repair, it might be necessary to have them realigned. In addition, the interlock could also become misaligned. This is located on the hinge's side, and might require to be cleaned. In certain instances, it may be necessary to replace the hinges.
The seals may wear out or become damaged over time, allowing air to escape. Installing high-quality weatherstripping can help keep draughts at bay. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce draughts.
The final method to cut down on drafts effectively is to use a draught-excluder. These are usually made of fabric read more tubes filled with a filler which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cosy!
With a bit of regular maintenance and repairs your windows made of upvc will continue to provide excellent insulation and security for your home. It is essential to remember that all windows eventually get worn out and it could be cheaper to replace them instead of fixing them. If you are experiencing issues with your upvc window you should consult a professional immediately.